| Drivers |
| Touchscreen Drivers (Windows XP) - ELO |
Elo XP Setup |
This is the Setup file for installing the ELO Touchscreen Driver for Workstations running Windows XP. CAREpoint Workstations that have a blue taskbar at the bottom of the screen are running Windows XP. |
Elocal32 (Elo XP Version) |
This file is needed to calibrate the ELO Touchscreen through CAREpoint software. |
| Touchscreen Drivers (Windows XP) - Fujitsu |
Fujitsu XP Setup |
This is the Setup file for installing the Fujitsu Touchscreen Driver for Workstations running Windows XP. CAREpoint Workstations that have a blue taskbar at the bottom of the screen are running Windows XP. |
Elocal32 (Fujitsu XP Version) |
This file is needed to calibrate the Fujitsu Touchscreen through CAREpoint software. |
| Touchscreen Drivers (Windows XP) - 3M |
3M XP Setup |
This is the Setup file for installing the 3M Touchscreen Driver for Workstations running Windows XP. CAREpoint Workstations that have a blue taskbar at the bottom of the screen are running Windows XP. |
Elocal32 (3M XP Version) |
This file is needed to calibrate the 3M Touchscreen through CAREpoint software. |
| Touchscreen Drivers (Windows NT) - ELO |
| Elo NT Setup |
This is the Setup file for installing the ELO Touchscreen Driver for Workstations running Windows NT. CAREpoint Workstations that have a grey taskbar at the bottom of the screen are running Windows NT. |
| Touchscreen Drivers (Windows NT) - Fujitsu |
Fujitsu NT Setup |
This is the Setup file for installing the Fujitsu Touchscreen Driver for Workstations running Windows NT. CAREpoint Workstations that have a grey taskbar at the bottom of the screen are running Windows NT. |
| Elocal32 (Fujitsu NT Version) |
This file is needed to calibrate the Fujitsu Touchscreen through CAREpoint software. |
| Touchscreen Drivers (Windows NT) - 3M |
3M NT Setup |
This is the Setup file for installing the 3M Touchscreen Driver for Workstations running Windows NT. CAREpoint Workstations that have a grey taskbar at the bottom of the screen are running Windows NT. |
Elocal32 (3M NT Version) |
This file is needed to calibrate the 3M Touchscreen through CAREpoint software. |
| USB Flash Drive |
usbstor.inf |
System File required for enabling USB Flash Drives on the CAREpoint Workstation. |
usbstor.pnf |
System File required for enabling USB Flash Drives on the CAREpoint Workstation. |
usbstor.reg |
Registry settings required for enabling USB Flash Drives on the CAREpoint Workstation. |
usbstor.sys |
System File required for enabling USB Flash Drives on the CAREpoint Workstation. |
| |
| Software |
None |
| |
| Utilities |
| Maxtor HDD Utility |
| PowerMax |
Creates a Boot Disk to use for diagnosing and repairing Maxtor and Seagate Hard Drives |
| Western Digital HDD Utility |
| WD HDD Utility |
Creates a Boot Disk to use for diagnosing and repairing Western Digital Hard Drives |
| |
| Windows Patches |
| Time Zone Editor |
| TZEdit.exe |
Utility for Editing the Time Zone information to reflect the Daylight Savings Time date changes effective March 11th, 2007 |
| Windows Patches |
Windows XP KB921883 |
Creates a Boot Disk to use for diagnosing and repairing Western Digital Hard Drives |
Windows XP KB924270 |
Creates a Boot Disk to use for diagnosing and repairing Western Digital Hard Drives |
| |
